LUMAX TECHNICAL PLANNING TOOL

SMD Screen Calculator for LED Display Planning

Plan a buildable LED display from your available dimensions, viewing distance, environment and content. Get a technical starting specification — not just a price estimate.

SCREEN SIZEPIXEL PITCHMODULE LAYOUTPOWERWEIGHTBUDGET
PROJECT INPUTS

Configure Your LED Screen

Enter the actual space and project conditions. The calculator updates the technical plan from the selected configuration.

FEET
FEET
Used as a planning input for pixel-pitch recommendation. Final selection depends on content, environment and site conditions.
APPLICATION
CONTENT TYPE
AUTO / MANUAL
REFERENCE
Cabinet dimensions and weight are planning assumptions. Confirm the actual cabinet specification before fabrication or structural work.
WHAT THIS CALCULATOR DELIVERS

More Than an LED Screen Price Calculator

This tool is designed for technical and project planning: it converts the available space into a buildable module layout and then estimates the main display requirements.

📐

Buildable Size

Calculates a complete-module display that fits inside the available width and height.

🔲

Pixel Pitch

Recommends a starting pitch from viewing distance, environment and content type.

🧩

Module & Cabinet Count

Estimates module quantity and planning cabinet quantity from the selected cabinet layout.

⚡

Power Planning

Provides a planning estimate for power-supply quantity and display electrical load.

🖥️

Resolution

Estimates pixel dimensions and total pixel load for the physical display.

⚖️

Weight Allowance

Provides a cabinet-based planning weight that must be verified against the final hardware.

📊

Aspect Ratio

Shows the actual buildable screen ratio rather than only the requested space ratio.

💰

Budget Range

Uses Lumax planning rates as a starting display-budget range, not a final quotation.

LUMAX MODULE PLANNING

Built Around the Physical LED Module

The calculator uses a 320 × 160 mm module planning orientation, with 32 cm horizontal × 16 cm vertical as the default layout. The physical module and final cabinet specification should always be confirmed before production.

For power planning, Lumax's current configuration uses 1 × 40A supply per 4 modules for outdoor screens and 1 power supply per 6 modules for indoor screens. Final electrical design should be confirmed against the actual selected hardware.

Module size320 × 160 mm
Default orientation320 mm W × 160 mm H
Planning interfaceHUB75
Outdoor power planning1 × 40A / 4 modules
Indoor power planning1 supply / 6 modules
Final verificationRequired before fabrication
READY FOR THE NEXT STEP?

Turn Your Screen Dimensions Into a Technical Plan

Use the calculator for planning, then share the result with Lumax for final module, cabinet, control-system, power, structure and installation confirmation.

📞 +92 339 9443357   •   Islamabad / Rawalpindi, Pakistan
Results are technical planning estimates, not structural engineering or a final quotation. Actual module, cabinet, controller, power, weight, brightness, mounting structure and installation specifications must be confirmed against the selected hardware and site conditions.
Scroll to Top